Close ×
 / Language 
日本 ( Japanese )

Unsere deutschsprachigen Shops

Nos boutiques francophones

Nuestras tiendas de habla hispana

Nuestras tiendas de habla italiana

Onze Nederlandstalige winkels

Nasze sklepy mówiące po polsku.

Nasze sklepy polskojęzyczne


Våra svensktalande butiker


By Wunderlabel on 10/04/2021

Sew a Christmas Table Runner

Sew a Christmas Table Runner - Free  Tutorial

You might think that Christmas is ages away but it is actually less than a hundred days now until Christmas Eve. Sew a Christmas table runner with our free tutorial and start getting ready for the festive season. This DIY table runner would also make a great present for a loved one. It measures 30 x 210 cm.. 

  • How wide should the patchwork table runner be?

To figure out how wide the table runner needs to be, just divide the width of your table by three.  


  • How long does the DIY table runner need to be?

There is an easy way to calculate the required length for your table runner. Simply measure your table and add 30 cm for the fabric that will be hanging over the edge of the table on both sides. 


  • What type of fabric do I need for this table runner free pattern?

The type of fabric really depends on the occasion. A non-iron fabric (like cotton or polyester) is best for yearly events such as Christmas and Easter, or for everyday use. For parties, communions, weddings and christenings you might consider using a non-woven fabric. 

  • What kind of table runner is best for a square table?

You can use any shape table runner for a square table. For a round table a runner with rounded or pointed ends is best. 

You will need: 

  • Fabric: 2.2 m of the main fabric and scraps for the appliqués 
  • Quilt batting
  • Bondaweb or similar stabiliser
  • Embroidery backing
  • Sewing thread
  • Your own woven iron-on labels

Let’s get started!

Before you can get started with this table runner tutorial you will first need to measure your table. Ours measures 90 x 180 cm. The width of the table runner can be determined by dividing the width of your table by three. To calculate the length of the table runner you just need to add 30 cm to the length of your table. Our table runner will end up measuring 30 x 210 cm.

Start by cutting the fabrics to size. You will need a piece of quilt batting measuring 32 x 210 cm. Cut a piece of the main fabric to the same size as the quilt stabiliser and another measuring 32 x 220 cm. (If your table has different measurements then you will obviously need to change the table runner size accordingly.) 

Sew a Christmas Table Runner

You can now proceed to embellish the ends and the larger piece of fabric, if you wish. We chose a Christmas tree design for our project.  First make two templates as shown in the picture. Then sew strips of green fabric together and use the templates to cut out four large and five small trees before sewing a brown tree trunk to the bottom centre of each tree.

Sew a Christmas Table Runner

Iron two small and one large tree in the centre of each end of the fabric using Bondaweb or a similar stabiliser, about 7 cm from the edge of the fabric. Iron the remaining trees onto the centre of the table runner. Then outline the trees with a tight zig-zag stitch after first placing the stabiliser under the blanket and holding it in place with pins. Feel free to choose a different motif for your table runner. 
How about Christmas baubles, a snowman or stars?

Sew a Christmas Table Runner

Now place the pieces together as follows: First the large piece of fabric right side up, followed by the smaller piece of fabric right side down, then the quilt batting. Sew the long sides together with a seam allowance of 1cm.

Sew a Christmas Table Runner

Turn the runner through one end and iron.

Sew a Christmas Table Runner

Next, hem the short ends of the table ribbon - fold them about 2.5cm inwards, iron the fold tight, fold the edge another 2.5cm inwards and iron again. Topstitch close to the edge to secure the hem.

Sew a Christmas Table Runner
Sew a Christmas Table Runner

Topstitch your DIY table runner all the way around. If you like, you can also quilt the table runner.

Sew a Christmas Table Runner

Finally, attach a personalised iron-on label. 

Sew a Christmas Table Runner

And you are ready for Christmas!

P.S.: Check out our other tutorial on how to sew a table runner with a star appliqué.

<style type="text/css"><!--td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}--></style>Don't miss these blog posts from Wunderlabel:

Table Runner Free Pattern

DIY Christmas Stocking

How to Make an Easy Wine Bottle Gift Bag

Folded Fabric Star Ornaments

Do You want to save this idea for later? 

Simply bookmark the link to this blog post or add it to your "Favourites" so that you can quickly find it in your browser later.
Here is how to save the tutorial: 

  • On your computer: Click on the asterisk or the three dots in the top right hand corner or on the book icon in the top left hand corner (depending on the browser you use). 
  • On your Android smartphone: Click on the three dots in the top right hand corner and then on the asterisk.
  • On your iPhone: Click the book icon at the bottom and add the link to your bookmarks or book list.

Don’t miss out: subscribe to the Wunderlabel Newsletter!

Would you like to be informed about new creative instructions, tips and inspirations from us? Then subscribe to our newsletter to benefit from our special promotions and more!